T114/B guide rail
Table of Contents
T114/B guide rail
Guide Rail
Our guide rail sale to the world’s five continents.
Elevator Guide Rails
Frequently Asked Questions
What difference is there between cold and planed guide rails?
Why is it important to choose the right clip?
Why are the guide rails 5 meters long?
Do the guide rails have any surface treatment?
What does the roughness level of the guide rails affect?
How can comfort be ensured?
In a high-speed lift, is it sufficient to use a good roller?
Full range of all Size
Choose Elevator Guide Rail Size
We mainly produce different types of elevator guide rails, such as T45/A, T50/A, T70-1/B, T75-3/B, T78/B, T82/B,T89/B,T90/B,T114/B,T127-2/B ,T127-1/B, T140-1/B,T140-2/B and T140-3/B. If you want non-standard products, we will also be able to produce for you with your detail specifications. Moreover, we provide accessories for them, such as fish plates, clips and screws.
Oneelevator Guide rail
MACHINED GUIDE RAIL SERIES
Hollow Guide Rail Series
Elevator Guide Rails FAQs
Ordering the t114
To order the t114, send us a photograph of the existing unit and its nameplate at [email protected]. Please quote the complete code including any revision suffix so that our team can confirm the correct variant, current stock and lead time before you commit.
About the t114
Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The t114 sits in the general elevator & escalator parts group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on t114 come down to a small number of serviceable assemblies — the controller, the door operator, the brake, the drive chain and the safety circuit.
Every t114 we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.
Buying guidance and compatibility notes
Before ordering the t114, confirm three things. First, the equipment model, the controller family and the exact reference printed on the failed component. Second, reference numbers change between revisions, so we map the old code onto the current one before quoting. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.
On fitting, one point is worth repeating: a photograph of the nameplate is usually faster than a description, and avoids a return for the wrong revision. Almost every repeat failure we see on t114 traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.
If you are unsure which variant of the t114 you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same general elevator & escalator parts group, so a planned shutdown can cover several wear items at once.
Related parts and further reading
Because t114 is only one item in the general elevator & escalator parts group, these related pages may help you plan the work:
Reference sources
The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.
Michele Romitti
Can you please quote:
Guide Shoe Requirements:
Performance:
Max Roller Load – 1400lbs
Spring Preload Setting – 350 lbs
For Rail Size – T114/B
Other:
Meet ASME 17.1-2010
Used on Coastguard Offshore Patrol Cutter Freight Elevator
Optional Approval – ABS-NVR
Ductile Cast Iron or no Grey Cast Iron Preferable, Please note what parts require cast iron (what type it is) and/or offer alternatives
Qty: 8 per elevator