Mitsubishi 90cm 11cm 6200 bearing
Table of Contents
Mitsubishi 90cm 11cm 6200 bearing
90cm rope wheel
nylon wheel
iron wheel door wheel
wire rope pulley
90*11*6200
Elevator hall door wire rope wheel
Size：90cm * 11cm * 6200 bearing
Mitsubishi / Otis / Kone / SIGMA / Wheel / Hall Door Rope / 90 * 11 * 6200
Ordering the mitsubishi 90cm 11cm
To order the mitsubishi 90cm 11cm, send us a photograph of the existing unit and its nameplate at [email protected]. Please quote the complete code including any revision suffix so that our team can confirm the correct variant, current stock and lead time before you commit.
About the mitsubishi 90cm 11cm
Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The mitsubishi 90cm 11cm sits in the chains / belts / drives group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on mitsubishi 90cm 11cm come down to pitch elongation beyond the wear limit, seized rollers, and sprockets whose tooth profile has hooked after running with a stretched chain.
Every mitsubishi 90cm 11cm we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.
Buying guidance and compatibility notes
Before ordering the mitsubishi 90cm 11cm, confirm three things. First, the chain pitch, link count and the number of strands, since a duplex chain will not substitute for a simplex one. Second, chain numbers are frequently local to a manufacturer, so we match on pitch and link count rather than on the printed number alone. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.
On fitting, one point is worth repeating: always measure elongation across at least twenty pitches — a chain that looks acceptable over five links is often past its limit overall. Almost every repeat failure we see on mitsubishi 90cm 11cm traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.
If you are unsure which variant of the mitsubishi 90cm 11cm you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same chains / belts / drives group, so a planned shutdown can cover several wear items at once.
Related parts and further reading
Because mitsubishi 90cm 11cm is only one item in the chains / belts / drives group, these related pages may help you plan the work:
- Handrail drive chains
- Escalator Main Drive Chain
- Escalator Step Chain
- Step Chain Sprocket
- Step Chain Tensioner
Reference sources
The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.
[email protected]
Landing door rollersHello Dear Ammar
How are you.
Thanks for your inquiry.
We can not find the part from this ID number GCA26800ML1.
Could you please send us pictrue to check, or show us the drive name plate.
From: Ammar
Date: 2020-03-12 14:45
To: sales
Subject: Contact Form submission from One-stop Elevator supplier
This email was submitted from: https://www.oneelevator.com/contact/
Sender’s name: Ammar
E-mail: [email protected]
Phone: 0096782?026
Message: I need for otis drive
GCA26800ML1
Dear Sir,
How are you.
Thanks for your inquiry.
Otis White plastic Handrail guide is USD 11/pc
One section is 6 meters,you can confirm the total quantity through the length of your escalator.
From: Robert McDow
Date: 2017-05-17 00:46
To: sales
Subject: Contact Form submission from One-stop Elevator supplier
This email was submitted from: https://www.oneelevator.com/contact/
Sender’s name: Robert McDow
E-mail: [email protected]
Phone: 602 25??16 ext.7402
Message: How do i go about ordering a piece of Otis White plastic Handrail guide .
From: Z. Resto
Date: 2017-07-12 18:41
To: sales
Subject: Re: Contact Form submission from One-stop Elevator supplier
Thank you, I will let you know.
El jul. 12, 2017 2:13 AM, “sales” escribió:
Dear Sir,
How are you.
Thanks for your inquiry.
LG*OTIS DPC-121 AEG04C224 board is USD 480/pc(Second-hand ones)
and USD 820/pc(100% new ones)
Please check
https://www.oneelevator.com/lg-otis-lift-dpc-121/
From: Za??el
Date: 2017-07-11 20:47
To: sales
Subject: Contact Form submission from One-stop Elevator supplier
This email was submitted from: https://www.oneelevator.com/contact/
Sender’s name: Za??l
E-mail: [email protected]
Message: I need a quote for DOC-121 pcb. Please include price and availability. Thank’s for your time.
???
??? Elevator Services, Inc.
Dear Sir,
How are you.
Thanks for your inquiry.
Thyssen API/CPI tool is USD 150/pc
It can test CPI TCM MC2 MC1 MC3 and other thyssen board.
We will also send the manual to you too,Please give us your delivery address then we will check air freight for you.
https://www.oneelevator.com/thyssen-parameter-tool/
From: ????????
Date: 2017-09-12 18:56
To: sales
Subject: Contact Form submission from One-stop Elevator supplier
This email was submitted from: https://www.oneelevator.com/contact/
Sender’s name: ?????
E-mail: [email protected]
Message: Hello,
I′m searching for
thyssen parameter test
DIAGNOSTIC UNIT I
Part No.: API/CPI
and need a price for it.
Thank you
Dear Sir,
How are you.
Oneelevator.com are a global elevator parts supplier from china.
We are committed to do a one-stop solution to your elevator parts procurement. Especially in Escalator Chain and Step Roller.
And we are the suppliers of Thyssen,Otis,Kone,Mitsubishi and so on.
I hope you can find some time to look at our website.
If you need any help, please feel free to contact us.
Here is elevator parts catelog,please check
https://www.oneelevator.com/categories/
Leopold Zhang
+86-18061464200
[email protected]
https://www.oneelevator.com/
From: ????????
Date: 2017-09-21 19:07
To: sales
Subject: Contact Form submission from One-stop Elevator supplier
This email was submitted from: https://www.oneelevator.com/contact/
Sender’s name: M??????
E-mail: [email protected]
Phone: 99363834555
Message: Dear Sirs,
My name is Maksat from Turkmenistan. Our company ” Arap Ulagy” activity more concentrated on elevators&escalator installation, repairing and maintenance of all brands in the world. At present time our elevators&escalator services are increased and we are facing really shortage of spare parts as written bellow:
1. Landing door contacts
2. Landing door rollers
3. Landing door shoes
4. Landing door MBS
5. Safety edge of cabin doors
6. Interceptor and MBS – MULTI BEAM SENSOR
7. Door motor belts
8. Up – Down limit switches
9. Over load board and switch
10. Cabin top – bottom shoe and pads
11. Hall button and electrical boards
12. Car station boards
13. Control panel boards
14. Motor brake pads
15. PAD – POSITION ARRIVAL DEVICE
16. Oil box for guide rail
17. Lubrication oil for guide rail
Please send your quotation for the above mentioned parts including transportation cargo to CIP Ashgabat, Turkmenistan for ele., brand “ Kleemann ”, “ LG Sigma ” , “ Mitsubishi ”, “ Otis ” separately as soon as possible able as to plan accordingly.
Thanks in Advance
???? Bekmyradow
Sales Manager