KONE Elevator IO board KM50018783
Table of Contents
KONE Elevator IO board KM50018783
KM50018783
PCB, I/O CARD KR6-KR7 DRIVE UNIT
Gross weight: 0,2kg
KONE Elevator board IO in Drive KDM40 KM50018783
Product Details
Component Family Codes
KDM – KDM – Drive Family
ZZ-006 – PSR – Pre-defined packages
Product Description
vi: Bo giao di?n bi?n t?n KR6-KR7
fr: CARTE ENTREES-SORTIES KDM KR6-KR7
es: I/O CARD FOR KR6 AND KR7 DRIVE UNIT
de: I/O KARTE FüR KR6 AND KR7 EINHEIT
fi: I/O-KORTTI KR6 JA KR7 S?HK?K?YT?LLE
hu: KOMMUNIKáCIóS KáRTYA
en: PCB, I/O CARD KR6-KR7 DRIVE UNIT
ru: ПЛАТА ВХОДОВ\ВЫХОДОВ KDM
Material Utilisation Group
11500 – PC BOARDS
Material group
B72 – PCB assembly
Product Family Codes
KONE 3000E MiniSpace
Ordering the kone elevator io
To order the kone elevator io, send the exact model or reference code printed on the original part to [email protected]. Please quote the full code including any suffix so that our team can confirm the correct variant, current stock and lead time before you commit.
About the kone elevator io
Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The kone elevator io sits in the control board / PCB group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on kone elevator io come down to electrolytic capacitor ageing, cracked solder joints around the power stage, corroded edge connectors, and blown output transistors after a supply fault.
Every kone elevator io we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.
Buying guidance and compatibility notes
Before ordering the kone elevator io, confirm three things. First, the controller catalogue number and the board revision letter, plus the fault code stored in the controller memory. Second, the same board is frequently fitted across several controller families, so the equipment model alone is not enough to identify the right revision. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.
On fitting, one point is worth repeating: discharge the DC bus before removing a power board, and photograph the connector layout before you unplug anything. Almost every repeat failure we see on kone elevator io traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.
For buyers comparing suppliers, the kone elevator io is one of the items most often requested alongside the main controller.
If you are unsure which variant of the kone elevator io you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same control board / PCB group, so a planned shutdown can cover several wear items at once.
Related parts and further reading
Because kone elevator io is only one item in the control board / PCB group, these related pages may help you plan the work:
- Elevator spare parts
- Door Operator Controller
- Elevator Display
- Elevator Encoder
- Elevator Service Tool
Reference sources
The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.
