Hyundai Elevator Parts List

— Classified Compilation of Common Hyundai Elevator / Escalator Parts Available on the Market —

Compiled on: August 20, 2026

Basis of compilation: publicly available import / export shipment records, tender and procurement announcements, maintenance and repair materials, and public parts trading platforms (china-elevators.com / CEP Elevator Products, Alibaba, AliExpress, Made-in-China, etc.).

Scope: this list covers the main system components and common wear parts of Hyundai traction elevators, with a supplementary section on escalator / moving walkway components. The complete official Hyundai parts catalog is only available through Hyundai Elevator official channels (Hyundai Elevator Co., Ltd. and its regional subsidiaries) and cannot be fully reproduced here.

Usage notes: the models and part numbers listed are for reference in inquiries and procurement only. Actual purchases must be verified against the equipment in service (drawing number / job number) and confirmed by Hyundai official or authorized suppliers. OEM or certified parts are recommended for safety-critical components.

1. About Hyundai Elevator and Part Numbering

• Hyundai Elevator Co., Ltd. was established in 1984 as a joint venture of Hyundai Electrical Engineering and Westinghouse Electric; Schindler succeeded Westinghouse’s stake in 1989. Headquarters: Chungju, South Korea (relocated 2022). Products: elevators, escalators, moving walkways, parking systems.
• Overseas subsidiaries: China (Hyundai Elevator (China) Co., Ltd., Shanghai), Vietnam, Indonesia, Malaysia, Turkey, Brazil, with agents in about 49 countries. It ranks among the top 10 global elevator manufacturers and holds roughly 39% of the Korean domestic market (2020, per public reports).
• Classic control platforms: STVF1 / STVF5 / STVF7 / STVF9 (VVVF control cabinets), plus W-BT and ELEX4B; newer platforms include WB100 / WB110 and HPI / CPI (WBVF / WBHS series boards).
• Part number families: parts made in Korea usually carry “KR” / “KRR” prefixes (e.g. KR203100671, KRR332101221); parts made in China usually carry “C” prefixes (e.g. C203P000168, C223P001652).
• PCB drawing numbers commonly follow the 204C-XXXX, 20400XXX or 280CXXX series (e.g. TCB-3 204C2467H22, MCU 20400065, OPB-340 280C288H13). Always check the drawing number and revision (H11 / H22 / G01 etc.).

2. Control Cabinet Boards (STVF Series, 204C Drawings)

3. WB / HPI Platform Boards and Displays

4. Inverters and Drive Modules

5. Door System Components

6. COP / LOP, Displays and Cabin Equipment

7. Traction Machine and Drive Mechanics

8. Guiding System, Car and Counterweight

9. Safety Components

10. Hoistway and Position Detection

11. Escalator / Moving Walkway Components (Supplementary)

Applicable models include Hyundai SBT2 / S-BT2 1200 series escalators and moving walkways.

12. Common Wear Parts and Maintenance Tools

13. Sourcing Channels and Selection Advice

• Official channels: Hyundai Elevator Co., Ltd. (HQ in Chungju, South Korea) and its regional subsidiaries — Hyundai Elevator (China) Co., Ltd. (Shanghai), Hyundai Thanh Cong Elevator (Vietnam), and subsidiaries in Indonesia, Malaysia, Turkey and Brazil; agents in about 49 countries. Genuine parts and after-sales service are available through these channels.
• CEP Elevator Products (china-elevators.com): carries Hyundai OEM and compatible spare parts with a PC board purchase / repair / exchange program (self-reported 30,000+ part line).
• Public trading platforms: Alibaba, AliExpress, Made-in-China etc. list numerous aftermarket Hyundai boards (TCB-3, PWR, CCB, UCMP boards etc.) and mechanical parts.
• Board repair services: chip-level repair of Hyundai STVF series boards is offered by specialized repair companies (e.g. in Guangzhou and Beijing), which can be a cost-effective alternative to replacement.
• Advice 1: verify the full drawing number and revision (e.g. 204C2467H22, CCB-3 204C2348H24); boards with different revisions are generally not interchangeable.
• Advice 2: distinguish KR-prefix (Korea-made) and C-prefix (China-made) part families; cross-reference with the actual equipment before ordering.
• Advice 3: for safety-critical components (governor, safety gear, buffer, door lock, brake, UCMP / rope gripper), OEM or certified parts meeting type-test requirements are strongly recommended.
• Advice 4: newer Hyundai control systems may be encrypted; third-party maintenance can require official authorization or dedicated diagnostic tools (e.g. HHT-WB100).

14. Disclaimer and Limitations

• This list was compiled from publicly available import / export shipment records, tender and procurement announcements, maintenance materials and public parts trading platforms. Compilation date: August 20, 2026.
• The complete official Hyundai parts catalog is not publicly available and can only be obtained through Hyundai Elevator official channels; this document cannot be exhaustive.
• The models and part numbers listed are for reference in inquiries and procurement only; actual purchases should be verified against the equipment in service and confirmed by official or authorized suppliers.
• Parts prices vary significantly by channel (OEM / aftermarket) and over time, and are therefore not included in this document.
• Elevators are special equipment; replacement of components must be carried out by qualified entities in accordance with applicable regulations.

Ordering elevator

To order elevator, send the exact model or reference code printed on the original component to [email protected]. Please quote the complete code including any suffix so that our team can confirm the correct variant, current stock and lead time before you commit.

About the elevator

Elevator and escalator control systems are built around a relatively small number of serviceable assemblies: the drive and motion controller, the main control or mother board, the power stage, the encoder feedback interface, and the door or brake control module. The elevator is one of those assemblies, and like every board in the cabinet it is replaced on a different service interval. Each carries its own set of reference numbers depending on the original equipment manufacturer and the revision of the installation.

Every elevator we supply is inspected before dispatch. Boards are checked for physical damage, capacitor condition and connector integrity, and are packed to survive international transit. Where a superseded revision is the only one available, we state that clearly and explain the substitution so that the installing engineer can make an informed decision.

Buying guidance and compatibility notes

Before ordering elevator, confirm three things. First, the exact part number and revision from the failed unit. Second, the equipment model and controller family it was installed in, since the same board can be used across several product lines. Third, whether the installation is a traction lift or an escalator, as the duty cycle and current rating differ between the two.

If you are unsure which revision of the elevator you need, send a photograph of the nameplate and the existing board alongside the fault description. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable assemblies in the same controller, so that a planned shutdown can cover several wear items at once.

Related parts and further reading

If you are servicing a complete controller, these related pages may help you plan the work:

• Elevator parts catalogue — browse the full range of spare parts we supply.
• Elevator control boards — mother boards, drive boards and power boards.
• Contact our sales team — request a quotation or compatibility check.

Reference sources

The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact part number against your own equipment nameplate.

• ISO 8100-1 lift safety standard — international requirements covering lift components and control systems.
• International Electrotechnical Commission (IEC) — the standards body for electrical equipment used in lift and escalator installations.
• Otis — original equipment manufacturer service and parts reference.