CONTITECH TRACTION BELT FOR OTIS ELEVATOR
Table of Contents
CONTITECH TRACTION BELT FOR OTIS ELEVATOR
CONTITECH TRACTION BELT FOR OTIS ELEVATOR
100% Otis original, it is BRUGG brand,which is a world-renowned brand worldwide.
Weight is about 0.5KG/meter
Original AAA717AD1 AAA717R1 Elevator Traction Belt
These two type are 60mm width ones
Elevator Traction Steel Belt For Otis Gen2 Elevator, AAA717X1
Elevator 30mm Traction Belt AAA717W1
Lift Traction Steel Belt 30mm 10core 43KN AAA717AM2
AAA717AP2 Elevator belt OTIS Elevator Steel Belt
elevator steel belt AAA717AJ2
These Five type are 30mm width ones
GEN2 Elevator 25mm Traction Belt AAA717AJ1
These One type are 25mm width ones
Ordering the contitech traction belt
To order the contitech traction belt, send the exact model or reference code printed on the original part to [email protected]. Please quote the full code including any suffix so that our team can confirm the correct variant, current stock and lead time before you commit.
About the contitech traction belt
Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The contitech traction belt sits in the chains / belts / drives group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on contitech traction belt come down to pitch elongation beyond the wear limit, seized rollers, and sprockets whose tooth profile has hooked after running with a stretched chain.
Every contitech traction belt we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.
Buying guidance and compatibility notes
Before ordering the contitech traction belt, confirm three things. First, the chain pitch, link count and the number of strands, since a duplex chain will not substitute for a simplex one. Second, chain numbers are frequently local to a manufacturer, so we match on pitch and link count rather than on the printed number alone. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.
On fitting, one point is worth repeating: always measure elongation across at least twenty pitches — a chain that looks acceptable over five links is often past its limit overall. Almost every repeat failure we see on contitech traction belt traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.
If you are unsure which variant of the contitech traction belt you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same chains / belts / drives group, so a planned shutdown can cover several wear items at once.
Related parts and further reading
Because contitech traction belt is only one item in the chains / belts / drives group, these related pages may help you plan the work:
- Handrail drive chains
- Escalator Main Drive Chain
- Escalator Step Chain
- Step Chain Sprocket
- Step Chain Tensioner
Reference sources
The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.
Steven Lopes
We have an apartment complex with seven buildings, and each building has an otis elevator.
We need hoist belts and we need an installer.
We have a maintenance contract with Kone which is about to expire and which excludes the hoist belts
I can be reached at 203–4 10–2634
One Elevator Team
We can provide this product, but for the installation work, you must find someone locally