Description

Category: RS32 Hangzhou Theo without voice appease

RS32 Hangzhou Theo with voice / upgrade RS32-C RS32 Xizi Otis without voice comfort

RS32 Xizi Otis with voice appease

DBA26800J1 for Tianjin Otis

RS32-C for quick and easy use

A3N200691 RS32 Hangzhou Theo with voice Ninety-nine new

RS32 is divided according to the version without the voice comfort function. The black plug-in is used for the voice comfort function, which can be distinguished according to this.

DAA26800J1 and DBA26800J1 are common.

RS32, RS32-C, DBA26800J1 cannot be used in common with each other.

Otis use and quick use can be installed directly without changing the parameters. Other options need to be dialed according to the steps: RS32 board: modify the parameters or match the parameters with the boss:
Plug in the server – enter the password 1234 – menu 3 – menu 1 – blue key + 0 and blue key + 1 are to modify the previous parameter – blue key + 2 and blue key + 3 are to modify the latter parameter, change After each parameter, remember the blue key + confirm (save). Blue key + goon is to return to the previous parameter

Jiangyin One Elevator keeps address board in the aftermarket range we ship to maintenance contractors and distributors in more than 60 countries. This listing covers the RS32 address board DAA26800J1 as a complete supply line: the assembly itself, the wear items that sit around it, and the documentation you need to confirm the fit before you pay. Every address board we dispatch is pulled from a decommissioned installation or taken from current production, then checked against the failure modes that actually occur in service. Consolidated orders reduce the freight cost per address board noticeably on sea shipments.

Buying address board from Jiangyin One Elevator

Supply is organised around the way maintenance contractors actually buy. You can take a single address board as a like-for-like replacement, or take it as part of a wider order that consolidates freight. Condition grading is explicit, so a tested pull and a new-build unit are never quoted as the same thing.

Condition grading is what separates a useful aftermarket supplier from a warehouse full of boxes. A tested pull from a decommissioned installation can be an entirely sound service part, but only if it has been checked against the failure modes that actually occur.

How to identify the right address board

Identification is the step that decides whether a address board fits first time. The reliable route is the controller catalogue number or the code stamped on the original assembly, backed up by a photograph of the mounting face. Dimensions alone are rarely enough, because the same outline is often used across two generations with different electrical characteristics.

Where the root cause is the same assembly sold under different codes in different markets, in our experience compatibility questions are answered before the order rather than after the return.

Where address board is normally fitted

In service, a address board is most often replaced during modernisation, after a breakdown, or as part of a planned refurbishment where several wear items are done at the same visit. Contractors who plan the visit tend to order the surrounding consumables with it, because the labour is already on site.

Documentation travels with the part when it is done properly. A datasheet, a fitting note or simply a record of what the component was tested against removes a great deal of uncertainty for the engineer on site, particularly when the installation predates the current maintenance contractor.

What to check before ordering

Take a photograph of the part and its label before anything is disconnected; it settles more identification questions than any datasheet. Where the fixings, springs or rollers around the assembly are worn, replace them in the same visit; the labour is already paid for.

The underlying cause is usually lead times that are longer than the interval between service visits, which is why the equipment model, the controller family and the exact reference printed on the failed component identify the replacement.

Ordering and shipping

To order address board, send the part code, a photograph and the machine type. Quotations come back with the condition grade, the lead time and the freight options, and consolidated orders can be packed into one shipment to cut the per-unit cost.

Related stock held alongside this line: Elevator spare parts, Door Operator Controller, Elevator Display. These are the families most contractors order together, and they can be quoted as one consolidated shipment.

Consolidating orders matters more than it appears. Freight costs and customs handling are largely fixed per shipment, so combining several wear items into one consignment is usually cheaper than ordering them separately as each one fails.

address board: frequently asked questions

How quickly can you ship?

Stocked address board normally leaves within the same week. If the unit has to be pulled from a specific installation, we tell you the handling time up front rather than after payment.

Can you supply an alternative if the original code is obsolete?

Yes. Cross-matching by interface and rating is the normal way to handle a superseded code, and the alternative is quoted with the mapping explained so your technician can verify it before fitting.

The parts that are hardest to find are usually the ones that fail most often, which is why orders are consolidated where possible, because freight and customs handling are largely fixed per shipment.

For the standards and manufacturer references that govern this component, see Schindler service and components and Mitsubishi Electric elevator systems. Confirming the rating against the published specification is the safest way to close out an identification question.