Otis GAA21340L1 inverter

OVF20 22KW inverter PDF Module
Otis PIB GAA26800AV1 board is USD X290/pc
Otis PIB Card Part No: GAA26800AV1 whole moudle is USD X680/set

IGBT module SKIIP085NAB5439 (GAA21340L1) is a inverter module
Six month warranty, Delivery after 100% pass on machine test.
As this parts is out of produce for more than 20 years.

Ordering the otis gaa21340l1 inverter

To order the otis gaa21340l1 inverter, send us a photograph of the existing unit and its nameplate at [email protected]. Please quote the complete code including any revision suffix so that our team can confirm the correct variant, current stock and lead time before you commit.

About the otis gaa21340l1 inverter

Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The otis gaa21340l1 inverter sits in the control board / PCB group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on otis gaa21340l1 inverter come down to electrolytic capacitor ageing, cracked solder joints around the power stage, corroded edge connectors, and blown output transistors after a supply fault.

Every otis gaa21340l1 inverter we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.

Buying guidance and compatibility notes

Before ordering the otis gaa21340l1 inverter, confirm three things. First, the controller catalogue number and the board revision letter, plus the fault code stored in the controller memory. Second, the same board is frequently fitted across several controller families, so the equipment model alone is not enough to identify the right revision. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.

On fitting, one point is worth repeating: discharge the DC bus before removing a power board, and photograph the connector layout before you unplug anything. Almost every repeat failure we see on otis gaa21340l1 inverter traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.

If you are unsure which variant of the otis gaa21340l1 inverter you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same control board / PCB group, so a planned shutdown can cover several wear items at once.

Related parts and further reading

Because otis gaa21340l1 inverter is only one item in the control board / PCB group, these related pages may help you plan the work:

• Elevator spare parts
• Door Operator Controller
• Elevator Display
• Elevator Encoder
• Elevator Service Tool

Reference sources

The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.

• ISO 8100-1 — lift safety standard
• IEC — international electrotechnical standards
• Otis genuine parts reference