Lift STNLCD_LCI_4.3
Table of Contents
Lift STNLCD_LCI_4.3
KM51104200G11 STNLCD_LCI_4.3(Re-layout) BLACK ASSEMBLY
KM51104200G01 STNLCD_LCI_4.3(Re-layout) BLUE ASSEMBLY
Product Details
Component Family Codes
KDS – KONE Design Signalization System
Product Description
en: STNLCD_LCI_4.3(Re-layout) BLACK/BLUE ASSEMBLY
Material Utilisation Group
12110 – LANDING INDICATOR UNIT
Material group
B72 – PCB assembly
Gross weight: 0,14
Ordering lift
To order lift, send the exact model or reference code printed on the original component to [email protected]. Please quote the complete code including any suffix so that our team can confirm the correct variant, current stock and lead time before you commit.
About the lift
Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The lift sits in the general elevator & escalator parts group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on lift come down to a small number of serviceable assemblies — the controller, the door operator, the brake, the drive chain and the safety circuit.
Every lift we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.
Buying guidance and compatibility notes
Before ordering lift, confirm three things. First, the equipment model, the controller family and the exact reference printed on the failed component. Second, reference numbers change between revisions, so we map the old code onto the current one before quoting. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.
On fitting, one point is worth repeating: a photograph of the nameplate is usually faster than a description, and avoids a return for the wrong revision. Almost every repeat failure we see on lift traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.
If you are unsure which variant of the lift you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same general elevator & escalator parts group, so a planned shutdown can cover several wear items at once.
Related parts and further reading
Because lift is only one item in the general elevator & escalator parts group, these related pages may help you plan the work:
Reference sources
The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.
