LG 2R23336A brake coil
Table of Contents
LG 2R23336A brake coil
TKL traction machine holding brake coil 2R64091A
LG 2R23336A brake coil
Ordering the lg 2r23336a brake
To order the lg 2r23336a brake, send us a photograph of the existing unit and its nameplate at [email protected]. Please quote the complete code including any revision suffix so that our team can confirm the correct variant, current stock and lead time before you commit.
About the lg 2r23336a brake
Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The lg 2r23336a brake sits in the brake / safety gear group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on lg 2r23336a brake come down to glazed or oil-contaminated linings, weak coils, worn pivot bushes, and spring sets that have lost their rated tension.
Every lg 2r23336a brake we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.
Buying guidance and compatibility notes
Before ordering the lg 2r23336a brake, confirm three things. First, the brake model, the drum or disc diameter, and the rated torque shown on the original rating plate. Second, brake units are often shared between a traction machine and its close relatives, but the lining grade can differ with the duty rating. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.
On fitting, one point is worth repeating: brake springs and linings should always be replaced as a matched set, and the air gap re-measured to the manufacturer figure afterwards. Almost every repeat failure we see on lg 2r23336a brake traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.
Springs should be replaced on the same schedule as the linings they press against. A spring that has relaxed by a few percent will hold the car but change the deceleration profile, which shows up as a complaint about ride quality long before it shows up as a fault code.
If the installation is showing an occasional failure to hold on a test with rated load, the identification route is straightforward: the brake model, the drum or disc diameter and the rated torque on the rating plate are what identify the correct assembly.
Wear debris tells you what the brake has been doing. Fine black dust that clings to the lining surface points to a drum that is running hot, while a glazed, mirror-like face suggests the brake has been slipping under load. Both are readable before any instrument is taken to the unit.
The underlying cause is usually a drum or disc that has gone out of round and is now wearing the lining unevenly, which is why safety gear and overspeed protection are matched to the guide rail and the rated speed, not to the equipment model alone.
If you are unsure which variant of the lg 2r23336a brake you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same brake / safety gear group, so a planned shutdown can cover several wear items at once.
Related parts and further reading
Because lg 2r23336a brake is only one item in the brake / safety gear group, these related pages may help you plan the work:
- Elevator brake linings
- Escalator Brake Lining
- Elevator Limit Switch
- Elevator Load Weighing Device
- Elevator Guide Shoe
Reference sources
The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.
