Kone Screen NL3224BC35-20

NEC Display NL3224BC35-20
This Screen is used on Kone elevator.
Made by NEC

The parameters are as follows
A-si TFT-LCD
5.5 inch
Screen Size:111.36*83.52mm
Frame Siza:134*104.5mm

Ordering the kone screen nl3224bc35-20

To order the kone screen nl3224bc35-20, send us a photograph of the existing unit and its nameplate at [email protected]. Please quote the complete code including any revision suffix so that our team can confirm the correct variant, current stock and lead time before you commit.

About the kone screen nl3224bc35-20

Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The kone screen nl3224bc35-20 sits in the general elevator & escalator parts group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on kone screen nl3224bc35-20 come down to a small number of serviceable assemblies — the controller, the door operator, the brake, the drive chain and the safety circuit.

Every kone screen nl3224bc35-20 we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.

Buying guidance and compatibility notes

Before ordering the kone screen nl3224bc35-20, confirm three things. First, the equipment model, the controller family and the exact reference printed on the failed component. Second, reference numbers change between revisions, so we map the old code onto the current one before quoting. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.

On fitting, one point is worth repeating: a photograph of the nameplate is usually faster than a description, and avoids a return for the wrong revision. Almost every repeat failure we see on kone screen nl3224bc35-20 traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.

Condition grading is what separates a useful aftermarket supplier from a warehouse full of boxes. A tested pull from a decommissioned installation can be an entirely sound service part, but only if it has been checked against the failure modes that actually occur.

If you are unsure which variant of the kone screen nl3224bc35-20 you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same general elevator & escalator parts group, so a planned shutdown can cover several wear items at once.

Related parts and further reading

Because kone screen nl3224bc35-20 is only one item in the general elevator & escalator parts group, these related pages may help you plan the work:

• Elevator spare parts
• Escalator
• Door Operator Controller
• Elevator Brake Lining
• Handrail Drive Chain

Reference sources

The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.

• ISO 8100-1 — lift and escalator safety standard
• IEC — international electrotechnical standards
• Otis genuine parts reference