KONE KDL16L DRIVE MODULE
Table of Contents
KONE KDL16L DRIVE MODULE
KM953503G21
KM50302632H05
KDL16L 12A(continuous)
Type: KM953503G21
REV:2.9
SPECS:12A,400V
KONE inverter first wife the new KDL16L, KM953503G621/KM878617H01 can substitute V3F16L
KONE Part Number:
KM953503G14
Description:
KDL16L DRIVE MODULE, 18A, 400V
The KONE encoder, import quality assurance suitable for use with the KDL inverter supporting the use of KONE encoder KM950278G02/KM950278G01
Ordering the kone kdl16l drive
To order the kone kdl16l drive, send us a photograph of the existing unit and its nameplate at [email protected]. Please quote the complete code including any revision suffix so that our team can confirm the correct variant, current stock and lead time before you commit.
About the kone kdl16l drive
Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The kone kdl16l drive sits in the control board / PCB group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on kone kdl16l drive come down to electrolytic capacitor ageing, cracked solder joints around the power stage, corroded edge connectors, and blown output transistors after a supply fault.
Every kone kdl16l drive we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.
Buying guidance and compatibility notes
Before ordering the kone kdl16l drive, confirm three things. First, the controller catalogue number and the board revision letter, plus the fault code stored in the controller memory. Second, the same board is frequently fitted across several controller families, so the equipment model alone is not enough to identify the right revision. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.
On fitting, one point is worth repeating: discharge the DC bus before removing a power board, and photograph the connector layout before you unplug anything. Almost every repeat failure we see on kone kdl16l drive traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.
If you are unsure which variant of the kone kdl16l drive you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same control board / PCB group, so a planned shutdown can cover several wear items at once.
Related parts and further reading
Because kone kdl16l drive is only one item in the control board / PCB group, these related pages may help you plan the work:
- Elevator spare parts
- Door Operator Controller
- Elevator Display
- Elevator Encoder
- Elevator Service Tool
Reference sources
The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.
Vlado
Hello I need this Drive modul with cables and encoder, i swap this with V3F.Shipping to SLovakia
[email protected]
price has sent to your email, please check.
These KDL whole set can swap with V3F
Danny Tang
Pls advise the price of a KDL16 drive module’s PCB board for KONE lift including shipment charges to Malaysia. Thanks.
[email protected]
OK, please check your email
Vishal
Hello
Can you provide in India
[email protected]
Yes please check your email.
Mubarak
Greetings
I would like to know the price and delivery time required to Sultanate of Oman in the middle east for this part:
KM953503G21
KM50302632H05
KDL16L 12A(continuous)
Type: KM953503G21
REV:2.9
SPECS:12A,400V
Thanks and hoping to hear from you soon.
Mubarak
[email protected]
Greetings Mubarak，
Nice to hear from you.
We have these KONE parts to sale,
100% new with Original package.
Megan Hart
Hello
Please can we get costs for this
[email protected]
Hello Dear Megan,
How are you.
Thanks for your inquiry.
KM953503G21 KDL16L 14A inverter is USD 1199/pc
We have this KDL16L in our stock,
Delivery time is within 24 hours and the price is valid for a long time.
100% new with original package
KDL16L 14A is USD 1×99/pc
And Whole set (Replace V3F16L) is USD 1×00/pc
(KDL16L Inverter+encoder+contact lines(CABLES )=V3F16L Inverter)
Please check
https://www.oneelevator.com/kone-kdl16l-drive-module/
Air freight is USD 200/pc (air door to door your service)
We have detailed instructions if you need them
KDL16L 14A KM953503G621
KDL16L 14A KM953503G621
Please tell me best price one pec.
[email protected]
Hello Sir,
How are you.
Thanks for your inquiry.
KM953503G21 KDL16L 14A inverter is USD 1199/pc
We have this KDL16L in our stock,
Delivery time is within 24 hours and the price is valid for a long time.
100% new with original package
KDL16L 14A is USD 1199/pc
And Whole set (Replace V3F16L) is USD 1400/pc
(KDL16L Inverter+encoder+contact lines(CABLES )=V3F16L Inverter)
Please check
https://www.oneelevator.com/kone-kdl16l-drive-module/
Air freight is USD 200/pc (air door to door your service)
We have detailed instructions if you need them
Pradeep
KDL16 12A,400V. Price in Indian INR please
[email protected]
12A ones are less used. We have them in stock.
I have quoted you the price in US dollars. Please check the email
THEODOROS
I WOULD LIKE TO KNOW THE COST FOR KDL 16L OR V3F 16L(REPAIRED).
[email protected]
KDL16L 14A is USD 1×50/pc
And Whole set (Replace V3F16L) is USD 1×00/pc
(KDL16L Inverter+encoder+contact lines(CABLES )=V3F16L Inverter)
Please check
https://www.oneelevator.com/kone-kdl16l-drive-module/
1.Please send us your delivery address to check the air freight
2.We have detailed instructions if you need them
[email protected]
Please also check your email
Andrey Kazakov
Hi,
I would like to know the cost for one of these KDL16L plus shipping to Bulgaria and how long would it take.
[email protected]
Please check your email.
konrad
Hi,
how much is the cost for a Kone KDL 16L and how much is the shipping to Italy?
Thanks very much!
[email protected]
We have this KDL16L in our stock,
Delivery time is within 24 hours and the price is valid for a long time.
100% new with original package
KDL16L 14A is USD 1×50/pc
[email protected]
Sender’s name: M*
E-mail: man*[email protected]
Phone: 094*35365
Message: Requires One No. Drive Module KDL 16L 12A 400V for Kone Elevator lift.
Krzysztof
HI
I would like to known cost for DRIVE MODULE,KDL16L 12A 400V one unit plus shipping to Poland and how long it take.
Thanks for help
[email protected]
This is our superior product, the price you can check in your mailbox
Geovanis
I need to know what is the best protection for this elevator KDL 16L-12A. Can I use fusible type J or a breaker with a motorguard?
[email protected]
Sorry we only sale KDL16L
Local engineers need to know the technical questions on site.
tameca beckford
Please could you provide me with a cost for a Kone KDL16 Drive Upgrade kit
[email protected]
KDL16L is USD 1X00/pc
And Whole set (Replace V3F16L) is USD 2X00/pc(Inverter,encoder and lines instead of V3F16L)
Please check
manuel estrada
necesito me cotizen un inversor
[email protected]
Dear Sir,
How are you.
Thanks for your inquiry.
Yes,We have this in stock but we forget to show on our website.
KDL16R is USD 1120/pc,Delivery time is 1-2 days.
And air freight is about USD 200
Mr Sangale
Dear Sir, Kindly give me best price for this drive KDL16L/14A for one number quantity.
[email protected]
KDL16L is USD 1850/pc
And Whole set (Replace V3F16Es) is USD 2150/pc(Inverter,encoder and lines instead of V3F16L)
Please check
https://www.oneelevator.com/kone-kdl16l-drive-module/
Mark Knowles
Hi
Please could you provide me with a cost for a Kone KDL16 Drive Upgrade kit
[email protected]
KDL16L is USD 1850/pc
And Whole set (Replace V3F16L) is USD 2300/pc(Inverter,encoder and lines instead of V3F16L)
Please check
https://www.oneelevator.com/kone-kdl16l-drive-module/
Brady Morrison
Need replacement cost for V3F 16L/20a. Thanks you.
[email protected]
ｔｈａｎｋｓ ｆｏｒ ｙｏｕｒ ｉｎｑｕｉｒｙ．
Ｋｏｎｅ Ｉｎｔｅｒｖｅｒ ｐｒｉｃｅ ｉｓ ｓｅｎｄｉｎｇ ｔｏ ｙｏｕｒ ｅｍａｉｌ，Ｐｌｅａｓｅ ｃｈｅｃｋ．
Ｄｅｌｉｖｅｒｙ ｔｉｍｅ ｉｓ １ ｄａｙ．
Martin
Hallo,
could you send me quote for replace old V3 to new KDL16L (kit).
Sending to Czech republic, Prague. Do you offer warranty for it?
Thanks
Martin
[email protected]
Yes KDL16l can replace V3F16L
Price will send to your email,please check.
And one year warranty.
Erik Pyndt Jørgensen
Hey!
We a building company that need to change 3 drive modules for kone mono space lifts kdl 16!
how much is you price for either new modules or upgrade kits?
And shipping to Copenhagen, Denmark
Thank you
Regards
Erik Pyndt Jørgensen
Architect
Arcaholding A/S
[email protected]
Yes we have this KDL16L in stock,Price will send to your email,please check.
Fernando
Please if you could contact us for a quote for a V3f 16L OR THE REPLACEMENT KDL16L.
THANK YOU!
[email protected]
Dear Sir,
V3f16L have out of produce for 3 years
Now we use KDL16L+ encoder to replace
Price will send to your email
Please Check
qi su
Hi do you have the drive can replace the V3F 16/20A, and how about the price for it?
Thank you
[email protected]
Nice to hear from you.
KDL16L+Encoder can replace V3F16L
Price will send to your mail.
Brian
Could you please supply me with a cost for the Kone KDL drive upgrade kit
Regards Brian
[email protected]
Do you want upgrade your KONE V3F16L Drive?
Kone KDL drive upgrade kit
1.KDL16L USD1X50/pc
2.Encoder USD300/pc
3.Contact line USD100/pc
Delivery time 1 day
thien tran
I would like to known cost for one unit plus shipping to USA and how long it take.
Thanks
[email protected]
This only cost 5 days by UPS.
Price will be send to your email soon.