KONE Component KM768080G01
Table of Contents
KONE Elevator Component KM768080G01
Product Name:KONE Elevator Component KM768080G01 Model No:KM768080G01 Brake control KM768080G01
About kone elevator and escalator parts
To order kone elevator and escalator parts, send the exact model or reference code printed on the original component to [email protected]. Please quote the complete code including any suffix so that our team can confirm the correct variant, current stock and lead time before you commit.
What we supply for kone
Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. We stock kone parts covering the items that fail most often in daily service. In practice the failures we see on kone elevator and escalator parts come down to electrolytic capacitor ageing, cracked solder joints around the power stage, corroded edge connectors, and blown output transistors after a supply fault.
All kone parts we supply are inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.
Buying guidance and compatibility notes
Before ordering kone elevator and escalator parts, confirm three things. First, the controller catalogue number and the board revision letter, plus the fault code stored in the controller memory. Second, the same board is frequently fitted across several controller families, so the equipment model alone is not enough to identify the right revision. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.
On fitting, one point is worth repeating: discharge the DC bus before removing a power board, and photograph the connector layout before you unplug anything. Almost every repeat failure we see on kone elevator and escalator parts traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.
When a drive or mother board is replaced, it is worth checking the DC bus capacitors and the cooling path at the same time. A board that failed from overheating will fail again if the fan or heatsink is left as it was.
A controller board carries the whole logic of the installation on one or two PCBs; knowing whether the installation is machine-room or machine-room-less narrows the controller family immediately.
Bench testing before dispatch catches the majority of faulty stock. Boards are powered up, exercised through their diagnostic modes where the manufacturer supports it, and checked for the specific failure modes that matter in service rather than for cosmetic condition.
A unit showing an intermittent stop at a random floor with no repeatable pattern is usually telling you that the replacement is supplied with the connector layout photographed so the refit is unambiguous.
If you are unsure which variant of the kone elevator and escalator parts you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same control board / PCB group, so a planned shutdown can cover several wear items at once.
Related parts and further reading
Because kone elevator and escalator parts is only one item in the control board / PCB group, these related pages may help you plan the work:
- Elevator spare parts
- Door Operator Controller
- Elevator Display
- Elevator Encoder
- Elevator Service Tool
Reference sources
The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.
