Kone 7000 V3F25 DRIVE MODULE

KM870050G01/KM713990G01/KM782999G01  V3F25 DRIVE MODULE 40A

KM870050G02/KM713990G02/KM782999G02  V3F25 DRIVE MODULE 80A

KM870050G04/KM713990G04/KM782999G04  DRIVE MODULE,V3F25 100A MLB
1. KM713990G01
V3F25 DRIVE mODULE 40A REPLACED BY KM782999G01
1. KM713990G02
V3F25 DRIVE MODULE 80A REPLACED BY KM782999G02
2. KM725810G01
PC BOARD, CMB
3. KM725800G01
PC BOARD, INBH
4. KM733473G01
PC BOARD, HCB (MOTION CONTROL BOARD) REPLACED BY KM781380G01
5. KM259796
BRAKING RESISTOR 50 OHM (MODULE IS KM729845G02)
6. KM265249
TRANSISTOR, IGBT (BRAKE)
10. KM259836
TRANSISTOR,IGBT,40A,V3F-25
10. KM264513
TRANSISTOR,IGBT,80A,V3F-25
11. KM260389
BRIDGE, DIODE 40A
11. KM260390
BRIDGE, DIODE 80A
12. KM713994G02
DC LINK CAPACITOR MODULE 40AMP DRIVE
12. KM713994G06
DC LINK CAPACITOR MODULE 80AMP DRIVE

Ordering the kone 7000 v3f25

To order the kone 7000 v3f25, send us a photograph of the existing unit and its nameplate at [email protected]. Please quote the complete code including any revision suffix so that our team can confirm the correct variant, current stock and lead time before you commit.

About the kone 7000 v3f25

Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The kone 7000 v3f25 sits in the control board / PCB group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on kone 7000 v3f25 come down to electrolytic capacitor ageing, cracked solder joints around the power stage, corroded edge connectors, and blown output transistors after a supply fault.

Every kone 7000 v3f25 we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.

Buying guidance and compatibility notes

Before ordering the kone 7000 v3f25, confirm three things. First, the controller catalogue number and the board revision letter, plus the fault code stored in the controller memory. Second, the same board is frequently fitted across several controller families, so the equipment model alone is not enough to identify the right revision. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.

On fitting, one point is worth repeating: discharge the DC bus before removing a power board, and photograph the connector layout before you unplug anything. Almost every repeat failure we see on kone 7000 v3f25 traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.

For buyers comparing suppliers, the kone 7000 v3f25 is one of the items most often requested alongside the main controller.

If you are unsure which variant of the kone 7000 v3f25 you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same control board / PCB group, so a planned shutdown can cover several wear items at once.

Related parts and further reading

Because kone 7000 v3f25 is only one item in the control board / PCB group, these related pages may help you plan the work:

• Elevator spare parts
• Door Operator Controller
• Elevator Display
• Elevator Encoder
• Elevator Service Tool

Reference sources

The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.

• ISO 8100-1 — lift safety standard
• IEC — international electrotechnical standards
• Otis genuine parts reference