Kone 1000-400mm Autowalk pallet
Table of Contents
Kone 1000-400mm Autowalk pallet
Ordering the kone 1000-400mm autowalk
To order the kone 1000-400mm autowalk, send us a photograph of the existing unit and its nameplate at [email protected]. Please quote the complete code including any revision suffix so that our team can confirm the correct variant, current stock and lead time before you commit.
About the kone 1000-400mm autowalk
Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The kone 1000-400mm autowalk sits in the escalator / moving walk group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on kone 1000-400mm autowalk come down to worn step rollers and chain elongation, cracked skirt panels, glazed handrail drive wheels, and comb plates with broken teeth after a foreign-object stop.
Every kone 1000-400mm autowalk we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.
Buying guidance and compatibility notes
Before ordering the kone 1000-400mm autowalk, confirm three things. First, the escalator model, the rise, and whether the unit is a 30 or 35 degree incline, because the step and chain differ between them. Second, a handrail profile that matches the guide rail must be confirmed before ordering, since nominally similar handrails differ in cross-section. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.
On fitting, one point is worth repeating: step chains and handrail drive chains wear as a set — replacing one without the other usually means a repeat visit within the year. Almost every repeat failure we see on kone 1000-400mm autowalk traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.
Safety edges, skirt brushes and comb plates are the parts passengers actually interact with. A broken comb tooth or a missing skirt brush is not merely cosmetic — it is the mechanism that prevents a foot or a shoe from being drawn into the step band.
The underlying cause is usually a handrail drive wheel that has glazed and lost grip on a hardened rail surface, which is why the escalator model, the rise and the incline angle are the three facts that determine step and chain compatibility.
Handrails age in a way that is easy to overlook. The rubber hardens, the splice becomes visible, and the drive wheel loses grip on a surface that no longer has the friction it was designed for. A slipping handrail is a symptom of the whole drive train, not just of the rail.
If you are unsure which variant of the kone 1000-400mm autowalk you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same escalator / moving walk group, so a planned shutdown can cover several wear items at once.
Related parts and further reading
Because kone 1000-400mm autowalk is only one item in the escalator / moving walk group, these related pages may help you plan the work:
Reference sources
The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.
