15 Dec 2020

KM722040G01 REMOTE ALARM LCERAL

KM722040G01 REMOTE ALARM LCERAL

KM722040G01 REMOTE ALARM LCERAL

KM722040G01
PCB,REMOTE ALARM LCERAL
Gross weight: 0,064

Product Details
Component Family Codes
LCE – Lift Controller and Electrification
Product Description
vi: Bo m?ch reset tín hi?u intercom
ca: BOARD,LCERAL
fr: CARTE LCERAL RESOLVE/LCE/
sl: ELEKTRONIKA ?ASOVNA ZA ALARM
sv: KRETSKORT LCE LCERAL
no: KRETSKORT SCHEDA LCE/RAL
th: LCERAL ASSEMBLY
zh: LCERAL警报板
cs: PC DESKA LCERAL
en: PCB,REMOTE ALARM LCERAL
fi: PIIRIKORTTI LCE-RAL
es: PLACA LCERAL
de: PLATINE LCERAL
da: Printkort LCE/RAL – Remote alarm board
it: SCHEDA LCERAL LEGGE 13 ALLARME RICEVUTO
zf: SCHEDA LCERAL 警鐘告示
hu: VéSZJELZ? PANEL
ru: Печатная плата
Material Utilisation Group
10500 – PC BOARDS
Material group
B79 – Other PCBs
Product Family Codes
E-line MonoSpace
KONE 3000 MiniSpace
KONE 3000 MonoSpace
KONE 3000 TranSys
KONE 3000S MiniSpace
KONE 3000S MonoSpace
KONE Alta
KONE MiniSpace
KONE MonoSpace
KONE MonoSpace 700
KONE MonoSpace Special
KONE TranSys
MMS
ReGenerate 200_400
ReSolve 10
ReSolve 100
ReSolve 20
ReSolve 40

Ordering the km722040g01

To order the km722040g01, send us a photograph of the existing unit and its nameplate at [email protected]. Please quote the complete code including any revision suffix so that our team can confirm the correct variant, current stock and lead time before you commit.

About the km722040g01

Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The km722040g01 sits in the control board / PCB group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on km722040g01 come down to electrolytic capacitor ageing, cracked solder joints around the power stage, corroded edge connectors, and blown output transistors after a supply fault.

Every km722040g01 we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.

Buying guidance and compatibility notes

Before ordering the km722040g01, confirm three things. First, the controller catalogue number and the board revision letter, plus the fault code stored in the controller memory. Second, the same board is frequently fitted across several controller families, so the equipment model alone is not enough to identify the right revision. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.

On fitting, one point is worth repeating: discharge the DC bus before removing a power board, and photograph the connector layout before you unplug anything. Almost every repeat failure we see on km722040g01 traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.

If you are unsure which variant of the km722040g01 you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same control board / PCB group, so a planned shutdown can cover several wear items at once.

Because km722040g01 is only one item in the control board / PCB group, these related pages may help you plan the work:

Reference sources

The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.

Leave a Reply

Your email address will not be published. Required fields are marked *