Elevator directive board SM-03-D
Table of Contents
Elevator directive board SM-03-D
Product Name: Elevator directive board SM-03-D
Product No.: SM-03-D
Product details:
Product Features:
-With overcurrent protection
-With excellent immunity to electromagnetic interference and anti-static
Functional Description:
-Must match the car control panel SM-02 use
-For each additional eight layers need to be extended an instruction board
SM-04
SM.04
Serial 16-segment display board SM.04V7 / B,
Serial 16-segment display board SM.04V7 / C,
Serial call of board SM-04-ND
Serial Segment LCD panels SM.04VL16 / A
Serial dot matrix display board SM-04-of HRC
Serial dot matrix display board SM-04-HRD
Serial dot matrix display board SM-04-HSC
Serial dot matrix display board SM-04-the VRF
Serial dot matrix display board SM-04-VRJ
Serial dot matrix display board SM-04-of VSD
Serial dot matrix display large screen board the SM-04-HREB
Serial dot matrix display large screen board the SM-04-HREC
Serial ultra-thin display panels SM-04-V7
Serial ultra-thin display board SM-04-the VRH
Serial high-resolution LCD panels the SM-04-UL
Serial high-resolution LCD panels the SM-04-UL
Parallel display board SM.04H7 / A
Parallel display board SM.04H7 / B
Parallel display board SM.04HR / G
Parallel display the board SM.04HR / H
Parallel display board SM.04VS / E
Ordering the elevator directive board
To order the elevator directive board, send the exact model or reference code printed on the original part to [email protected]. Please quote the full code including any suffix so that our team can confirm the correct variant, current stock and lead time before you commit.
About the elevator directive board
Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The elevator directive board sits in the control board / PCB group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on elevator directive board come down to electrolytic capacitor ageing, cracked solder joints around the power stage, corroded edge connectors, and blown output transistors after a supply fault.
Every elevator directive board we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.
Buying guidance and compatibility notes
Before ordering the elevator directive board, confirm three things. First, the controller catalogue number and the board revision letter, plus the fault code stored in the controller memory. Second, the same board is frequently fitted across several controller families, so the equipment model alone is not enough to identify the right revision. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.
On fitting, one point is worth repeating: discharge the DC bus before removing a power board, and photograph the connector layout before you unplug anything. Almost every repeat failure we see on elevator directive board traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.
If you are unsure which variant of the elevator directive board you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same control board / PCB group, so a planned shutdown can cover several wear items at once.
Related parts and further reading
Because elevator directive board is only one item in the control board / PCB group, these related pages may help you plan the work:
- Elevator spare parts
- Door Operator Controller
- Elevator Display
- Elevator Encoder
- Elevator Service Tool
Reference sources
The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.
Ahmed hantouly
Dear sir,
This is Eng Ahmad hantouly from AL-MONTALAQ Company for electrical elevators in ISRAEL. I’m looking forward to buying the electronic board “SM-03-D “from you.
Could you sir inform how can we set this purchase/ what are the requirements, And where is your company location?
Best regards,
Eng AHMED HANTOULY.
[email protected]
Hello Eng AHMED
How are you.
Thanks for your inquiry.
We have SM-03-D to sale,
Step-SM-03-D is USD XX/pc(100% new and 100% step original)
Delivery time is within 24hours and we are form china.