Bluelight FR2000-stb-v9

Courier Weight: 1.3 kg

Single ladder , parallel and group control (Mating group control board) ;
Speed ​​range 0.25 – 4 m / s ;
Applicable ladder : Keti, bed ladder , housing ladder, tourism ladder ;
Applicable Floor: 64 landing less ;
Offers wireless and wired remote monitoring , community monitoring interface ;
Smart card with a lift station management and voice interfaces ;
Has weighed compensation and fire linkage interface ;
Offers Internet network interface ;
Supports a variety of incremental encoders and absolute encoders ;
Applicable to gear traction machine and gearless permanent magnet synchronous traction machine .

Features

Use of highly integrated 32 pairs of CPU, making the system operational accuracy and real-time processing capability has been an unprecedented increase . Openness to build intelligent elevator control platform laid a solid foundation ;
Using principal , work from the CPU , the main CPU to handle the elevator signal. From real-time monitoring and security system CPU is responsible to achieve fault tolerance and security monitoring. Greatly improve the safety and reliability of the system ;
Serial BL3000 BL2000 elevator control system is compatible with the system . In addition to the full realization BL2000 system functions, the system is still open in terms of intelligence and adds a number of features: as reserved Internet interface, support for absolute encoder , embedded fault diagnosis expert system ;
Large-screen LCD display, display, English menu interactive , real-time operation of the lift curve is displayed ;
Using hand-held programmer to achieve parameter setting , dump , you can also set parameters directly in the plate ;
Perfect unity of intelligence , security, forward-looking.

Ordering the bluelight fr2000-stb-v9

To order the bluelight fr2000-stb-v9, send us a photograph of the existing unit and its nameplate at [email protected]. Please quote the complete code including any revision suffix so that our team can confirm the correct variant, current stock and lead time before you commit.

About the bluelight fr2000-stb-v9

Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The bluelight fr2000-stb-v9 sits in the general elevator & escalator parts group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on bluelight fr2000-stb-v9 come down to a small number of serviceable assemblies — the controller, the door operator, the brake, the drive chain and the safety circuit.

Every bluelight fr2000-stb-v9 we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.

Buying guidance and compatibility notes

Before ordering the bluelight fr2000-stb-v9, confirm three things. First, the equipment model, the controller family and the exact reference printed on the failed component. Second, reference numbers change between revisions, so we map the old code onto the current one before quoting. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.

On fitting, one point is worth repeating: a photograph of the nameplate is usually faster than a description, and avoids a return for the wrong revision. Almost every repeat failure we see on bluelight fr2000-stb-v9 traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.

For buyers comparing suppliers, the bluelight fr2000-stb-v9 is one of the items most often requested alongside the main controller.

Availability of the bluelight fr2000-stb-v9 varies by revision, so it is worth confirming stock before committing to a delivery date.

When a bluelight fr2000-stb-v9 is replaced, the surrounding wiring and fixings should be inspected at the same time.

If you are unsure which variant of the bluelight fr2000-stb-v9 you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same general elevator & escalator parts group, so a planned shutdown can cover several wear items at once.

Related parts and further reading

Because bluelight fr2000-stb-v9 is only one item in the general elevator & escalator parts group, these related pages may help you plan the work:

• Elevator spare parts
• Escalator
• Door Operator Controller
• Elevator Brake Lining
• Handrail Drive Chain

Reference sources

The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.

• ISO 8100-1 — lift and escalator safety standard
• IEC — international electrotechnical standards
• Otis genuine parts reference