Kone KM713380 TRANSFORMER
Table of Contents
Kone KM713380 TRANSFORMER
Kone 713380G02.T18100009
KM713380G02
TRANSFORMER,CURRENT 400V 630VA 50/60HZ
Gross weight: 5,94
KM713380G01
TRANSFORMER,CURRENT 400V 500VA LCE
Gross weight: 4,12
KM713380G03
TRANSFORMER, CURRENT 420V 630VA
Gross weight: 5,45
KM713380G04
TRANSFORMER, 400V 500VA 50/60HZ
Gross weight: 4,2
Product Details
POWER RATING630VA
SECONDARY VOLTAGE230/20/20V
DIAMETER140MM
PRIMARY VOLTAGE400V
NUMBER OF OUTPUT3
Component Family Codes
LCE – Lift Controller and Electrification
MMS – Modular Modernization System
ZZ-006 – PSR – Pre-defined packages
Product Description
he: 400V 630VA 50/60HZ ???? ?????? ????
fi: MUUNTAJA,RENGAS- LCE 630VA400V
de: RINGKERNTRAFO LCE 400V 630VA
fr: TRANSFORMATEUR COURANT CDE LCE 630VA
cs: TRANSFORMATOR,400V 630VA 50/60Hz
ca: TRANSFORMER,400V 630VA 50/60Hz
en: TRANSFORMER,CURRENT 400V 630VA 50/60HZ
hu: TRANSZFORMáTOR 400V 630VA 50/60HZ
it: TRASFORMATORE x MODULO ALIM.(723) 630VA
ru: Трансформатор
zh: 变压器 630VA/400/230/20/20
zf: 變壓器 630VA/400/230/20/20
Material Utilisation Group
10400 – TRANSFORMERS
Material group
B201 – Power transformers, insulated coil
Product Family Codes
E-line MonoSpace
KONE 3000 MonoSpace
KONE 3000S MonoSpace
KONE MaxiSpace
KONE MonoSpace
KONE MonoSpace 700
KONE MonoSpace Special
KONE TranSys
Ordering the kone km713380 transformer
To order the kone km713380 transformer, send us a photograph of the existing unit and its nameplate at [email protected]. Please quote the complete code including any revision suffix so that our team can confirm the correct variant, current stock and lead time before you commit.
About the kone km713380 transformer
Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The kone km713380 transformer sits in the control board / PCB group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on kone km713380 transformer come down to electrolytic capacitor ageing, cracked solder joints around the power stage, corroded edge connectors, and blown output transistors after a supply fault.
Every kone km713380 transformer we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.
Buying guidance and compatibility notes
Before ordering the kone km713380 transformer, confirm three things. First, the controller catalogue number and the board revision letter, plus the fault code stored in the controller memory. Second, the same board is frequently fitted across several controller families, so the equipment model alone is not enough to identify the right revision. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.
On fitting, one point is worth repeating: discharge the DC bus before removing a power board, and photograph the connector layout before you unplug anything. Almost every repeat failure we see on kone km713380 transformer traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.
For buyers comparing suppliers, the kone km713380 transformer is one of the items most often requested alongside the main controller.
Availability of the kone km713380 transformer varies by revision, so it is worth confirming stock before committing to a delivery date.
If you are unsure which variant of the kone km713380 transformer you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same control board / PCB group, so a planned shutdown can cover several wear items at once.
Related parts and further reading
Because kone km713380 transformer is only one item in the control board / PCB group, these related pages may help you plan the work:
- Elevator spare parts
- Door Operator Controller
- Elevator Display
- Elevator Encoder
- Elevator Service Tool
Reference sources
The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.
