Mitsubishi Elevator Parts List — Produced / Supplied in China

A Categorized Reference Catalog of Models (Genuine + Compatible / OEM) — the most complete Mitsubishi elevator parts list compiled from public supplier data.

Mitsubishi elevator parts list compiled: 2026-08-27  |  Language: English  |  Source: Public supplier & manufacturer data

1. Scope, Method & Disclaimer

This document is a representative, categorized reference catalog of Mitsubishi elevator part models that are manufactured or supplied within China. The Mitsubishi elevator parts list below is compiled for international buyers who need a reliable cross-reference when sourcing spare parts, and per the requested scope it includes BOTH genuine and compatible items:

• Genuine parts – produced by Mitsubishi Electric / Shanghai Mitsubishi Elevator (SMEC) / Mitsubishi Electric Shanghai Electric Elevator (MESE).
• Compatible / OEM parts – third-party China-made spare and aftermarket parts that fit Mitsubishi elevators (marked ‘C’ in the Type column).

Reference sources used to cross-check the model designations in this Mitsubishi elevator parts list include the Mitsubishi Electric Building Solutions product documentation, the ISO 8100 series lift safety standards, and the GB national standard registry. Buyers should always verify exact part numbers against the original equipment plate before ordering.

The Mitsubishi elevator parts ecosystem in China is vast and continuously evolving; an exhaustive list of EVERY model is not practically achievable. The catalog below consolidates the major, commonly traded items, so treat this Mitsubishi elevator parts list as a working reference rather than an official manufacturer index.

2. Major Mitsubishi Elevator Parts List: Series in China (Context)

Mitsubishi elevators in China are built mainly by Shanghai Mitsubishi Elevator Co., Ltd. (SMEC) and Mitsubishi Electric Shanghai Electric Elevator (MESE), supported by a large domestic supply chain. The series below set the context for the Mitsubishi elevator parts list that follows, because each series uses a different generation of control and drive hardware.

3. Mitsubishi Elevator Parts List: Control System & PCB Boards

Main control, drive, interface and display printed-circuit boards used across Mitsubishi elevator generations (SP-VF, HOPE, GPS, ELENESSA, NEXWAY, MAXIEZ, MRL). This is the largest block in the Mitsubishi elevator parts list, and board codes follow the Mitsubishi Kxx / P1 / DOR naming convention.

4. Mitsubishi Elevator Parts List: Traction Machine & Drive

Permanent-magnet synchronous (PM) gearless traction machines and traction/sheave components. Mitsubishi-branded ZPML series are manufactured and supplied in China for LEHY, MAXIEZ, NEXWAY and ELENESSA, and they appear in this Mitsubishi elevator parts list alongside compatible sheave and brake assemblies.

5. Mitsubishi Elevator Parts List: Door Operator System

Door operator control boards, door motors, door knives (lock linkage), door locks and door mechanism parts. This section of the Mitsubishi elevator parts list covers genuine Mitsubishi DOR boards plus China-made compatible VVVF door operators.

6. Mitsubishi Elevator Parts List: Car Operating Panel, Hall Call & Push Buttons

Car Operating Panel (COP) and Landing Operating Panel (LOP) boards, floor displays and push buttons. The Mitsubishi elevator parts list includes original DA / LHB / HDA / MTD / LHH / LHD / LHA series buttons, plus widely used China-made compatible panels and displays.

7. Mitsubishi Elevator Parts List: Sensors & Encoders

Rotary encoders, leveling switches, door-position sensors, re-leveling sensors and proximity switches used in Mitsubishi elevator control and positioning. Every sensor in this Mitsubishi elevator parts list is listed with its applicable control generation so buyers can match the correct signal type.

8. Mitsubishi Elevator Parts List: Safety Components

Overspeed governors, limit / deceleration switches, safety gears and oil (hydraulic) buffers. Safety components carry the strictest compliance requirements of anything in the Mitsubishi elevator parts list, so both genuine Shanghai Mitsubishi items and China-made compatible buffers are listed separately.

9. Mitsubishi Elevator Parts List: Guide & Suspension

Guide shoes / liners, guide rails, traction ropes, oil cups and load-weighing devices. Every item in this section of the Mitsubishi elevator parts list uses standard T-series guide rails and wire ropes, which are mass-produced in China by multiple suppliers.

10. Mitsubishi Elevator Parts List: Electrical Components

Contactors and power semiconductor modules (IGBT / regenerative) used in Mitsubishi elevator drives and control cabinets. These electrical items round out the power side of the Mitsubishi elevator parts list.

11. Mitsubishi Elevator Parts List: Signal, Lighting & Consumables

Light curtains, car fans, locks, keys, sliders and other consumable / signal parts. The final category in this Mitsubishi elevator parts list mixes genuine Mitsubishi items with China-made compatible accessories, since most are routine replacement items.

12. Mitsubishi Elevator Parts List: Summary Statistics

The complete Mitsubishi elevator parts list contains 271 cataloged part lines: Genuine (G) 248, and Compatible / OEM (C) 23. This Mitsubishi elevator parts list is refreshed as new model data becomes available.

Note: ‘Model lines’ counts each listed model (or model family) as one entry. Some entries group related variants (e.g., ‘DOR-275 / DOR-276’) under a single line. This Mitsubishi elevator parts list is provided for reference and cross-matching only.

Ordering the mitsubishi elevator parts list

To order the mitsubishi elevator parts list, send the exact model or reference code printed on the original part to [email protected]. Please quote the full code including any suffix so that our team can confirm the correct variant, current stock and lead time before you commit.

About the mitsubishi elevator parts list

Elevator and escalator control systems are built around a relatively small number of serviceable assemblies: the drive and motion controller, the main control or mother board, the power stage, the encoder feedback interface, and the door or brake control module. The mitsubishi elevator parts list is one of those assemblies, and like every board in the cabinet it is replaced on a different service interval. Each carries its own set of reference numbers depending on the original equipment manufacturer and the revision of the installation.

Every mitsubishi elevator parts list we supply is inspected before dispatch. Boards are checked for physical damage, capacitor condition and connector integrity, and are packed to survive international transit. Where a superseded revision is the only one available, we state that clearly and explain the substitution so that the installing engineer can make an informed decision.

Buying guidance and compatibility notes

Before ordering the mitsubishi elevator parts list, confirm three things. First, the exact part number and revision from the failed unit. Second, the equipment model and controller family it was installed in, since the same board can be used across several product lines. Third, whether the installation is a traction lift or an escalator, as the duty cycle and current rating differ between the two.

If you are unsure which revision of the mitsubishi elevator parts list you need, send a photograph of the nameplate and the existing board alongside the fault description. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable assemblies in the same controller, so that a planned shutdown can cover several wear items at once.

Related parts and further reading

If you are servicing a complete controller, these related pages may help you plan the work:

• Elevator parts catalogue — browse the full range of spare parts we supply.
• Elevator control boards — mother boards, drive boards and power boards.
• Contact our sales team — request a quotation or compatibility check.

Reference sources

The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact part number against your own equipment nameplate.

• ISO 8100-1 lift safety standard — international requirements covering lift components and control systems.
• International Electrotechnical Commission (IEC) — the standards body for electrical equipment used in lift and escalator installations.
• Otis — original equipment manufacturer service and parts reference.