KONE Elevator Parts List

— Classified Compilation of Common KONE Elevator / Escalator Parts Available on the Market —

Compiled on: August 19, 2026

Basis of compilation: publicly available tender / procurement announcements, maintenance training materials, spare parts lists, and public parts trading platforms (Made-in-China.com, china-elevators.com, lift-parts-shop.com, AliExpress, etc.).

Scope: this list covers the main system components and common wear parts of KONE traction elevators, with a supplementary section on escalator / autowalk components. The complete official KONE parts catalog contains tens of thousands of SKUs and is only available through official channels such as KONE Spares / KONE China after-sales service; it cannot be fully obtained from public sources, and this document does not replace the official catalog.

Usage notes: the models and part numbers listed are for reference in inquiries and procurement only. Actual purchases must be verified against the equipment in service (job number) and confirmed by KONE official or authorized suppliers. OEM or certified parts are recommended for safety-critical components.

1. KONE Part Numbering and System Overview

• KONE material numbers generally follow the format “KM + digits + version suffix” (G/H etc. denote versions, e.g. KM773380G04); escalator part numbers often carry the DEE prefix.
• LCE is KONE’s mainstream elevator control system platform (LCECPU / LCEDRV / LCEADO etc.); the new-generation platform is KCE. Giant KONE’s new elevators use the NOVA intelligent control system (GCE-series boards).
• V3F / KDL / KDM are inverter drive platforms: V3F16, V3F16ES, V3F18, V3F25, KDL16, KDL16S, KDL-32, KDM, etc.
• The MX series are EcoDisc permanent-magnet synchronous gearless traction machines: MX06, MX10, MX11, MX14, MX18, MX20, MX32.
• AMD is KONE’s in-house door operator system (AMD1.0 / AMD1.5 / AMD2.0); Augusta (supplied by Wittur) and NBSL are common landing door systems.
• Giant KONE is the joint-venture brand in China; its parts system is largely common with KONE.
• Many old part numbers have been superseded by new ones (e.g. KM3711835 → KM51070342G01); substitution relationships should be checked before ordering.

2. Traction Machine and Drive System Components

3. Control Cabinet Circuit Boards (LCE / KCE Series)

4. Control Cabinet Electrical Components

5. Inverters and Drive Modules

6. Door System Components

7. Car and Landing Operation, Display and Buttons (COP / LOP)

8. Hoistway and Position Detection Components

9. Guiding System and Guide Rails

10. Car, Counterweight and Compensation System

11. Safety Components

12. Escalator / Autowalk Components (Supplementary)

Applicable models: TravelMaster 110/115, TransitMaster 140/165/185, Eco3000, EcoMod, etc.

13. Maintenance Consumables and Tools

14. Sourcing Channels and Selection Advice

• KONE official channel (China): KONE China after-sales service (24-hour hotline); service vehicles carry common spare parts, with an official commitment of parts delivery within 24 hours; maintenance contracts can include spare parts supply and preventive maintenance.
• KONE Spares (North America): a KONE wholly owned parts distribution center with an online interactive catalog (partsview.us), handling new and legacy parts for KONE, Montgomery, MAC, O&K and Armor, and providing upgrade kits for obsolete components (e.g. ECO3000 soft-starter replacement, disc brake inspection kits).
• Public trading platforms: Made-in-China.com, china-elevators.com (CEP Elevator Products, self-reported 30,000+ parts), lift-parts-shop.com (focused on LCE / KCE system parts), AliExpress, etc.; both OEM and aftermarket parts are available.
• Domestic aftermarket suppliers: numerous KONE parts dealers in Suzhou, Xi’an, Jinan and other regions, covering electronic boards, door system components, guide shoe inserts, buttons, etc.
• Advice 1: for safety-critical components (governor, safety gear, buffer, door lock, brake), OEM or certified parts meeting type-test requirements are recommended.
• Advice 2: for electronic boards, the full part number and version suffix must be verified (G01 / G02 / G04 etc. are not interchangeable); it is best to provide the actual equipment job number for supplier verification.
• Advice 3: pay attention to part number substitution — many old part numbers have been superseded by new ones (e.g. KM3711835 → KM51070342G01); confirm the latest usable part number before ordering.
• Advice 4: control systems of new KONE elevators are encrypted; third-party maintenance requires official authorization or dedicated diagnostic tools — verify compatibility before purchase.

15. Disclaimer and Limitations

• This list was compiled from publicly available tender / procurement announcements, maintenance training materials, spare parts lists and public parts trading platforms. Compilation date: August 19, 2026.
• The complete official KONE parts catalog (tens of thousands of SKUs) is not publicly available and can only be obtained through official channels such as KONE Spares and KONE China; this document cannot be exhaustive.
• The models and part numbers listed are for reference in inquiries and procurement only; actual purchases should be verified against the equipment in service and confirmed by official or authorized suppliers.
• Parts prices vary significantly by channel (OEM / aftermarket) and over time, and are therefore not included in this document; a separate price list can be prepared if needed.
• Elevators are special equipment; replacement of components must be carried out by qualified entities in accordance with applicable regulations.

About kone elevator and escalator parts

To order kone elevator and escalator parts, send the exact model or reference code printed on the original component to [email protected]. Please quote the complete code including any suffix so that our team can confirm the correct variant, current stock and lead time before you commit.

What we supply for kone

Elevator and escalator control systems are built around a relatively small number of serviceable assemblies: the drive and motion controller, the main control or mother board, the power stage, the encoder feedback interface, and the door or brake control module. We stock kone parts that fail most often in daily service, including drive boards, mother boards, encoders, door operators and brake modules. Each carries its own set of reference numbers depending on the original equipment manufacturer and the revision of the installation.

All kone parts we supply are inspected before dispatch. Boards are checked for physical damage, capacitor condition and connector integrity, and are packed to survive international transit. Where a superseded revision is the only one available, we state that clearly and explain the substitution so that the installing engineer can make an informed decision.

Buying guidance and compatibility notes

Before ordering kone elevator and escalator parts, confirm three things. First, the exact part number and revision from the failed unit. Second, the equipment model and controller family it was installed in, since the same board can be used across several product lines. Third, whether the installation is a traction lift or an escalator, as the duty cycle and current rating differ between the two.

For buyers comparing suppliers, kone elevator and escalator parts are among the lines most often requested alongside the main controller.

Availability of kone elevator and escalator parts varies by model and revision, so it is worth checking stock before committing to a delivery date.

When kone elevator and escalator parts are replaced, the surrounding wiring and connectors should be inspected at the same time.

Most enquiries about kone elevator and escalator parts come from maintenance contractors returning an installation to service quickly.

A photograph of the original component and its nameplate is usually enough for us to identify the correct kone part.

Pricing for kone elevator and escalator parts depends on model, condition grade and the quantity required.

Kone elevator and escalator parts are normally held in stock so that urgent breakdowns can be covered without a long lead time.

Where a kone item has been superseded, we supply the replacement and explain the difference in advance.

Customers ordering kone elevator and escalator parts can request a compatibility check against their existing equipment.

Dispatch of kone elevator and escalator parts is typically within three business days of order confirmation.

Engineers fitting kone elevator and escalator parts should follow the original manufacturer procedure for the controller family.

We can advise on related assemblies worth replacing at the same time as kone elevator and escalator parts.

For buyers comparing suppliers, kone elevator and escalator parts are among the lines most often requested alongside the main controller.

Availability of kone elevator and escalator parts varies by model and revision, so it is worth checking stock before committing to a delivery date.

When kone elevator and escalator parts are replaced, the surrounding wiring and connectors should be inspected at the same time.

Most enquiries about kone elevator and escalator parts come from maintenance contractors returning an installation to service quickly.

A photograph of the original component and its nameplate is usually enough for us to identify the correct kone part.

Pricing for kone elevator and escalator parts depends on model, condition grade and the quantity required.

Kone elevator and escalator parts are normally held in stock so that urgent breakdowns can be covered without a long lead time.

Where a kone item has been superseded, we supply the replacement and explain the difference in advance.

Customers ordering kone elevator and escalator parts can request a compatibility check against their existing equipment.

Dispatch of kone elevator and escalator parts is typically within three business days of order confirmation.

Engineers fitting kone elevator and escalator parts should follow the original manufacturer procedure for the controller family.

We can advise on related assemblies worth replacing at the same time as kone elevator and escalator parts.

For buyers comparing suppliers, kone elevator and escalator parts are among the lines most often requested alongside the main controller.

Availability of kone elevator and escalator parts varies by model and revision, so it is worth checking stock before committing to a delivery date.

When kone elevator and escalator parts are replaced, the surrounding wiring and connectors should be inspected at the same time.

Most enquiries about kone elevator and escalator parts come from maintenance contractors returning an installation to service quickly.

A photograph of the original component and its nameplate is usually enough for us to identify the correct kone part.

Pricing for kone elevator and escalator parts depends on model, condition grade and the quantity required.

Kone elevator and escalator parts are normally held in stock so that urgent breakdowns can be covered without a long lead time.

Where a kone item has been superseded, we supply the replacement and explain the difference in advance.

If you are unsure which revision of the kone you need, send a photograph of the nameplate and the existing board alongside the fault description. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable assemblies in the same controller, so that a planned shutdown can cover several wear items at once.

Related parts and further reading

If you are servicing a complete controller, these related pages may help you plan the work:

• Elevator parts catalogue — browse the full range of spare parts we supply.
• Elevator control boards — mother boards, drive boards and power boards.
• Contact our sales team — request a quotation or compatibility check.

Reference sources

The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact part number against your own equipment nameplate.

• ISO 8100-1 lift safety standard — international requirements covering lift components and control systems.
• International Electrotechnical Commission (IEC) — the standards body for electrical equipment used in lift and escalator installations.
• Otis — original equipment manufacturer service and parts reference.