Elevator door machine belt

Description

Material: Rubber
Classification: HTD 5M-12mm ordinary (price per meter) HTD 5M-15mm ordinary (price per meter) HTD 5M-20mm ordinary (price per meter) RPP P5M-12mm ordinary (price per meter) RPP P5M-15mm Ordinary model (price per meter) STD S5M-12mm common model (price per meter) STD S5M-15mm common model (price per meter) STD S5M-3mm common model (price per meter) HTD 8M-12mm common model (price per meter) ) HTD 8M-15mm common (price per meter) HTD 8M-20mm common (price per meter) STD S8M-12mm common (price per meter) STD S8M-15mm common (price per meter) STD S8M-20mm common Model (price per meter) HTD 5M-12mm five same models (price per meter) HTD 5M-20mm five same models (price per meter) RPP P5M-12mm five same models (price per meter) STD S5M-15mm five same models ( Price per meter) STD S5M-12mm five same models (price per meter) HTD 5M-15mm five same models (price per meter)
Type: Timing Belt

标价是每米的价格，需要几米拍几件。The price is per meter, it takes a few meters to shoot a few pieces.本商品是根据米数切断的，属于定制商品，付款后不支持7天无理由退换货。This product is cut off according to the number of meters, and it is a customized product. It does not support 7-day return and exchange without reason after payment.若需特殊裁断联系客服或者备注，无备注默认按一整根发出。If you need special cutting, please contact customer service or remarks. If there is no remarks, it will be sent as a whole by default.

选项里面前面是具体齿形齿距，后面是宽度。The front of the options is the specific tooth pitch, and the back is the width.

普通款材质是聚氨酯加钢丝，五同款材质是氯丁橡胶，五同给很多一线品牌电梯原装配套，质量更好，建议采购五同款。The common type is made of polyurethane and steel wire, and the Wutong type is made of neoprene. Wutong provides original equipment for many first-line brand elevators, and the quality is better. It is recommended to purchase the Wutong type.

HTD是全圆弧齿（5M、8M、14M等属于HTD），STD是半圆弧齿（S5M、S8M、S14M等属于STD），RPP是圆弧齿但齿上有凹槽（RPP5M、RPP8M等属于RPP，其中RPP5M也简称P5M）。HTD is full arc tooth (5M, 8M, 14M, etc. belong to HTD), STD is semi-circular arc tooth (S5M, S8M, S14M, etc. belong to STD), RPP is arc tooth but there are grooves on the tooth (RPP5M, RPP8M, etc. It belongs to RPP, of which RPP5M is also referred to as P5M).不同齿形齿距不通用，比如5M和8M不通用，S5M和5M不通用。Different tooth pitches are not common, such as 5M and 8M are not common, S5M and 5M are not common.

购买方法：比如皮带上标记HTD 3200 5M，是指HTD 5M型号，3200mm即3.2米。How to buy: For example, the belt marked HTD 3200 5M refers to the HTD 5M model, 3200mm is 3.2 meters.再确认下宽度，购买我们的5M选项对应宽度，长度4米，需要收到自己再准确的切下尺寸并且封口做环形的。Then confirm the width, buy our 5M option corresponding to the width, the length is 4 meters, you need to receive it and then cut the size accurately and seal it to make a ring.

Jiangyin One Elevator keeps machine belt in the aftermarket range we ship to maintenance contractors and distributors in more than 60 countries. This listing covers the Elevator door machine belt as a complete supply line: the assembly itself, the wear items that sit around it, and the documentation you need to confirm the fit before you pay. Every machine belt we dispatch is pulled from a decommissioned installation or taken from current production, then checked against the failure modes that actually occur in service. Every machine belt is inspected before it is packed.

Buying machine belt from Jiangyin One Elevator

Supply is organised around the way maintenance contractors actually buy. You can take a single machine belt as a like-for-like replacement, or take it as part of a wider order that consolidates freight. Condition grading is explicit, so a tested pull and a new-build unit are never quoted as the same thing. Every machine belt is inspected before it is packed.

Condition grading is what separates a useful aftermarket supplier from a warehouse full of boxes. A tested pull from a decommissioned installation can be an entirely sound service part, but only if it has been checked against the failure modes that actually occur. Every machine belt is inspected before it is packed.

How to identify the right machine belt

Identification is the step that decides whether a machine belt fits first time. The reliable route is the controller catalogue number or the code stamped on the original assembly, backed up by a photograph of the mounting face. Dimensions alone are rarely enough, because the same outline is often used across two generations with different electrical characteristics. Every machine belt is inspected before it is packed.

Where the root cause is the same assembly sold under different codes in different markets, in our experience compatibility questions are answered before the order rather than after the return.

Where machine belt is normally fitted

In service, a machine belt is most often replaced during modernisation, after a breakdown, or as part of a planned refurbishment where several wear items are done at the same visit. Contractors who plan the visit tend to order the surrounding consumables with it, because the labour is already on site.

Documentation travels with the part when it is done properly. A datasheet, a fitting note or simply a record of what the component was tested against removes a great deal of uncertainty for the engineer on site, particularly when the installation predates the current maintenance contractor.

What to check before ordering

Check the mechanical interface — hole centres, thickness and travel — with callipers rather than by eye, since two revisions can share an outline. Take a photograph of the part and its label before anything is disconnected; it settles more identification questions than any datasheet.

The underlying cause is usually lead times that are longer than the interval between service visits, which is why the equipment model, the controller family and the exact reference printed on the failed component identify the replacement.

Ordering and shipping

To order machine belt, send the part code, a photograph and the machine type. Quotations come back with the condition grade, the lead time and the freight options, and consolidated orders can be packed into one shipment to cut the per-unit cost.

Related stock held alongside this line: Door operator controllers, Door Vane, Elevator Door Guide Shoe. These are the families most contractors order together, and they can be quoted as one consolidated shipment.

Consolidating orders matters more than it appears. Freight costs and customs handling are largely fixed per shipment, so combining several wear items into one consignment is usually cheaper than ordering them separately as each one fails.

machine belt: frequently asked questions

How quickly can you ship?

Stocked machine belt normally leaves within the same week. If the unit has to be pulled from a specific installation, we tell you the handling time up front rather than after payment.

Can you supply an alternative if the original code is obsolete?

Yes. Cross-matching by interface and rating is the normal way to handle a superseded code, and the alternative is quoted with the mapping explained so your technician can verify it before fitting.

The parts that are hardest to find are usually the ones that fail most often, which is why orders are consolidated where possible, because freight and customs handling are largely fixed per shipment.

For the standards and manufacturer references that govern this component, see SJEC — Suzhou Jiangnan Elevator and Elevator — mechanical overview and terminology. Confirming the rating against the published specification is the safest way to close out an identification question.