OTIS 506NCE Escalator CHAIN
Table of Contents
OTIS 506NCE Escalator CHAIN
Pitch 135.4mm
Step distance 406mm
Step roller diameter 76.2mm
need more info,please feel free to contact us.
Ordering the otis 506nce escalator
To order the otis 506nce escalator, send us a photograph of the existing unit and its nameplate at [email protected]. Please quote the complete code including any revision suffix so that our team can confirm the correct variant, current stock and lead time before you commit.
About the otis 506nce escalator
Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The otis 506nce escalator sits in the escalator / moving walk group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on otis 506nce escalator come down to worn step rollers and chain elongation, cracked skirt panels, glazed handrail drive wheels, and comb plates with broken teeth after a foreign-object stop.
Every otis 506nce escalator we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.
Buying guidance and compatibility notes
Before ordering the otis 506nce escalator, confirm three things. First, the escalator model, the rise, and whether the unit is a 30 or 35 degree incline, because the step and chain differ between them. Second, a handrail profile that matches the guide rail must be confirmed before ordering, since nominally similar handrails differ in cross-section. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.
On fitting, one point is worth repeating: step chains and handrail drive chains wear as a set — replacing one without the other usually means a repeat visit within the year. Almost every repeat failure we see on otis 506nce escalator traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.
Escalators are harder on their components than lifts, simply because they run far more hours. A unit in a transport hub may be in motion eighteen hours a day, which means wear items reach their limits on a schedule measured in months rather than years.
The underlying cause is usually a comb plate with a broken tooth after a foreign-object stop, which is why the handrail cross-section must be confirmed against the guide rail rather than assumed from the model.
If you are unsure which variant of the otis 506nce escalator you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same escalator / moving walk group, so a planned shutdown can cover several wear items at once.
Related parts and further reading
Because otis 506nce escalator is only one item in the escalator / moving walk group, these related pages may help you plan the work:
Reference sources
The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.
Lev Shmid
Write please price and time of delivery of the traction chain, escalator Otis 506 NCE. The step width 800 mm, the number of stages 64. Serial number escalator No. B7NC0522.
Thank you.
[email protected]
Nice to hear from you.
we have otis 506 escalator step chain.