Kone L=140MM KM85119G16N
Table of Contents
Kone L=140MM KM85119G16N
Kone KM85119G16N
Elevator guide shoe insert red lift guide shoe
liner KM85119G16N L140mm * groove W16mm
KM85119G16N
INSERT,GUIDE SHOE G=16MM L=140MM
Gross weight: 0,605
KM85119H01
Replaced by Kone L=140MM KM85119G16N
GUIDE SHOE INSERT
About kone elevator and escalator parts
To order kone elevator and escalator parts, send the exact model or reference code printed on the original component to [email protected]. Please quote the complete code including any suffix so that our team can confirm the correct variant, current stock and lead time before you commit.
What we supply for kone
Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. We stock kone parts covering the items that fail most often in daily service. In practice the failures we see on kone elevator and escalator parts come down to a small number of serviceable assemblies — the controller, the door operator, the brake, the drive chain and the safety circuit.
All kone parts we supply are inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.
Buying guidance and compatibility notes
Before ordering kone elevator and escalator parts, confirm three things. First, the equipment model, the controller family and the exact reference printed on the failed component. Second, reference numbers change between revisions, so we map the old code onto the current one before quoting. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.
On fitting, one point is worth repeating: a photograph of the nameplate is usually faster than a description, and avoids a return for the wrong revision. Almost every repeat failure we see on kone elevator and escalator parts traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.
The independent aftermarket exists to cover the gap between what OEMs still stock and what is still running in the field. That gap widens every year, and the parts that fall into it are precisely the ones that fail most often in service.
The parts that are hardest to find are usually the ones that fail most often, which is why a wrong part is replaced without argument, because that is worth more over a maintenance contract than a lower unit price.
Identification is the hard part of any legacy order. Reference numbers change between revisions, the same assembly is sold under different codes in different markets, and the marking on a failed part is often the least reliable piece of information available.
For legacy installations, availability and correct identification matter more than headline price; warranty terms are a useful proxy for how thoroughly a part was tested before dispatch.
Condition grading is what separates a useful aftermarket supplier from a warehouse full of boxes. A tested pull from a decommissioned installation can be an entirely sound service part, but only if it has been checked against the failure modes that actually occur.
If you are unsure which variant of the kone elevator and escalator parts you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same general elevator & escalator parts group, so a planned shutdown can cover several wear items at once.
Related parts and further reading
Because kone elevator and escalator parts is only one item in the general elevator & escalator parts group, these related pages may help you plan the work:
Reference sources
The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.
