Mitsubishi 56mm Door hanging roller
Table of Contents
Mitsubishi 56mm Door hanging roller
Door hanging wheel 56 * 14 * 6201.
Mitsubishi 56mm Door hanging roller.
Bearing 6201,There are three axes
Ordering the mitsubishi 56mm door
To order the mitsubishi 56mm door, send us a photograph of the existing unit and its nameplate at [email protected]. Please quote the complete code including any revision suffix so that our team can confirm the correct variant, current stock and lead time before you commit.
About the mitsubishi 56mm door
Elevator and escalator installations are built around a relatively small number of serviceable assemblies, but they fail at very different rates. The mitsubishi 56mm door sits in the door system group, and it is replaced on a different service interval from the assemblies around it. In practice the failures we see on mitsubishi 56mm door come down to worn door rollers and hanger bearings, stretched operator belts, misaligned door vanes, and light curtain optics that fog up in humid plant rooms.
Every mitsubishi 56mm door we supply is inspected before dispatch. Each unit is checked for physical damage, correct marking and the specific wear or degradation patterns that matter for this class of component, then packed to survive international transit. Where a superseded revision is the only one available, we say so plainly and explain the substitution, so the installing engineer can make an informed decision rather than discovering the difference on site.
Buying guidance and compatibility notes
Before ordering the mitsubishi 56mm door, confirm three things. First, the door operator model, the door width and the number of panels, since a two-panel centre-opening door takes different hardware from a side-opening one. Second, door operators are commonly reused across a product family, so a vane or roller that fits one lift will usually fit its neighbours. Third, whether the installation is a traction lift or an escalator, since duty cycle and loading differ between the two.
On fitting, one point is worth repeating: re-level the track before fitting new rollers, otherwise the new bearings will wear out at the same rate as the old ones. Almost every repeat failure we see on mitsubishi 56mm door traces back to a related component that was left in place, or to an adjustment that was assumed rather than measured.
Light curtains and photocells are the parts most often blamed unfairly. If the optics are clean and aligned, the fault is usually in the wiring or the operator, not the sensor — though a sensor that has been in service for a decade is worth replacing as a matter of course.
If the installation is showing a lift that refuses to run with the doors apparently fully closed, the identification route is straightforward: a photograph of the operator and a note of the panel configuration answers most of the compatibility questions we receive.
Landing doors and car doors share many components but not all of them. A lock that works reliably on the car side may be unsuitable for a landing application because the mechanical interlock and the electrical monitoring are arranged differently.
If you are unsure which variant of the mitsubishi 56mm door you need, send a photograph of the nameplate and the existing component alongside a description of the fault. That is usually enough for our team to identify the correct replacement without a site visit, and it avoids the cost and delay of returning an incompatible part. We are also happy to advise on the other serviceable items in the same door system group, so a planned shutdown can cover several wear items at once.
Related parts and further reading
Because mitsubishi 56mm door is only one item in the door system group, these related pages may help you plan the work:
- Door operator controllers
- Door Vane
- Elevator Door Guide Shoe
- Elevator Door Hanger Roller
- Elevator Door Operator Belt
Reference sources
The compatibility information on this page was cross-checked against the following authoritative references. Always confirm the exact reference against your own equipment nameplate.
[email protected]
Hello Dear Ammar
How are you.
Thanks for your inquiry.
We can not find the part from this ID number GCA26800ML1.
Could you please send us pictrue to check, or show us the drive name plate.
From: Ammar
Date: 2020-03-12 14:45
To: sales
Subject: Contact Form submission from One-stop Elevator supplier
This email was submitted from: https://www.oneelevator.com/contact/
Sender’s name: Ammar
E-mail: [email protected]
Phone: 0096782?026
Message: I need for otis drive
GCA26800ML1
Dear Sir,
How are you.
Thanks for your inquiry.
Otis White plastic Handrail guide is USD 11/pc
One section is 6 meters,you can confirm the total quantity through the length of your escalator.
From: Robert McDow
Date: 2017-05-17 00:46
To: sales
Subject: Contact Form submission from One-stop Elevator supplier
This email was submitted from: https://www.oneelevator.com/contact/
Sender’s name: Robert McDow
E-mail: [email protected]
Phone: 602 25??16 ext.7402
Message: How do i go about ordering a piece of Otis White plastic Handrail guide .
From: Z. Resto
Date: 2017-07-12 18:41
To: sales
Subject: Re: Contact Form submission from One-stop Elevator supplier
Thank you, I will let you know.
El jul. 12, 2017 2:13 AM, “sales” escribió:
Dear Sir,
How are you.
Thanks for your inquiry.
LG*OTIS DPC-121 AEG04C224 board is USD 480/pc(Second-hand ones)
and USD 820/pc(100% new ones)
Please check
https://www.oneelevator.com/lg-otis-lift-dpc-121/
From: Za??el
Date: 2017-07-11 20:47
To: sales
Subject: Contact Form submission from One-stop Elevator supplier
This email was submitted from: https://www.oneelevator.com/contact/
Sender’s name: Za??l
E-mail: [email protected]
Message: I need a quote for DOC-121 pcb. Please include price and availability. Thank’s for your time.
???
??? Elevator Services, Inc.
Dear Sir,
How are you.
Thanks for your inquiry.
Thyssen API/CPI tool is USD 150/pc
It can test CPI TCM MC2 MC1 MC3 and other thyssen board.
We will also send the manual to you too,Please give us your delivery address then we will check air freight for you.
https://www.oneelevator.com/thyssen-parameter-tool/
From: ????????
Date: 2017-09-12 18:56
To: sales
Subject: Contact Form submission from One-stop Elevator supplier
This email was submitted from: https://www.oneelevator.com/contact/
Sender’s name: ?????
E-mail: [email protected]
Message: Hello,
I′m searching for
thyssen parameter test
DIAGNOSTIC UNIT I
Part No.: API/CPI
and need a price for it.
Thank you
Dear Sir,
How are you.
Oneelevator.com are a global elevator parts supplier from china.
We are committed to do a one-stop solution to your elevator parts procurement. Especially in Escalator Chain and Step Roller.
And we are the suppliers of Thyssen,Otis,Kone,Sch,Mitsubishi and so on.
I hope you can find some time to look at our website.
If you need any help, please feel free to contact us.
Here is elevator parts catelog,please check
https://www.oneelevator.com/categories/
Leopold Zhang
+86-18061464200
[email protected]
https://www.oneelevator.com/
From: ????????
Date: 2017-09-21 19:07
To: sales
Subject: Contact Form submission from One-stop Elevator supplier
This email was submitted from: https://www.oneelevator.com/contact/
Sender’s name: M??????
E-mail: [email protected]
Phone: 99363834555
Message: Dear Sirs,
My name is Maksat from Turkmenistan. Our company ” Arap Ulagy” activity more concentrated on elevators&escalator installation, repairing and maintenance of all brands in the world. At present time our elevators&escalator services are increased and we are facing really shortage of spare parts as written bellow:
1. Landing door contacts
2. Landing door rollers
3. Landing door shoes
4. Landing door MBS
5. Safety edge of cabin doors
6. Interceptor and MBS – MULTI BEAM SENSOR
7. Door motor belts
8. Up – Down limit switches
9. Over load board and switch
10. Cabin top – bottom shoe and pads
11. Hall button and electrical boards
12. Car station boards
13. Control panel boards
14. Motor brake pads
15. PAD – POSITION ARRIVAL DEVICE
16. Oil box for guide rail
17. Lubrication oil for guide rail
Please send your quotation for the above mentioned parts including transportation cargo to CIP Ashgabat, Turkmenistan for ele., brand “ Kleemann ”, “ LG Sigma ” , “ Mitsubishi ”, “ Otis ” separately as soon as possible able as to plan accordingly.
Thanks in Advance
???? Bekmyradow
Sales Manager
Anonymous
Hello Dear Ammar
How are you.
Thanks for your inquiry.
We can not find the part from this ID number GCA26800ML1.
Could you please send us pictrue to check, or show us the drive name plate.
From: Ammar
Date: 2020-03-12 14:45
To: sales
Subject: Contact Form submission from One-stop Elevator supplier
This email was submitted from: https://www.oneelevator.com/contact/
Sender’s name: Ammar
E-mail: [email protected]
Phone: 0096782?026
Message: I need for otis drive
GCA26800ML1
Dear Sir,
How are you.
Thanks for your inquiry.
Otis White plastic Handrail guide is USD 11/pc
One section is 6 meters,you can confirm the total quantity through the length of your escalator.
From: Robert McDow
Date: 2017-05-17 00:46
To: sales
Subject: Contact Form submission from One-stop Elevator supplier
This email was submitted from: https://www.oneelevator.com/contact/
Sender’s name: Robert McDow
E-mail: [email protected]
Phone: 602 25??16 ext.7402
Message: How do i go about ordering a piece of Otis White plastic Handrail guide .
From: Z. Resto
Date: 2017-07-12 18:41
To: sales
Subject: Re: Contact Form submission from One-stop Elevator supplier
Thank you, I will let you know.
El jul. 12, 2017 2:13 AM, “sales” escribió:
Dear Sir,
How are you.
Thanks for your inquiry.
LG*OTIS DPC-121 AEG04C224 board is USD 480/pc(Second-hand ones)
and USD 820/pc(100% new ones)
Please check
https://www.oneelevator.com/lg-otis-lift-dpc-121/
From: Za??el
Date: 2017-07-11 20:47
To: sales
Subject: Contact Form submission from One-stop Elevator supplier
This email was submitted from: https://www.oneelevator.com/contact/
Sender’s name: Za??l
E-mail: [email protected]
Message: I need a quote for DOC-121 pcb. Please include price and availability. Thank’s for your time.
???
??? Elevator Services, Inc.
Dear Sir,
How are you.
Thanks for your inquiry.
Thyssen API/CPI tool is USD 150/pc
It can test CPI TCM MC2 MC1 MC3 and other thyssen board.
We will also send the manual to you too,Please give us your delivery address then we will check air freight for you.
https://www.oneelevator.com/thyssen-parameter-tool/
From: ????????
Date: 2017-09-12 18:56
To: sales
Subject: Contact Form submission from One-stop Elevator supplier
This email was submitted from: https://www.oneelevator.com/contact/
Sender’s name: ?????
E-mail: [email protected]
Message: Hello,
I′m searching for
thyssen parameter test
DIAGNOSTIC UNIT I
Part No.: API/CPI
and need a price for it.
Thank you
Dear Sir,
How are you.
Oneelevator.com are a global elevator parts supplier from china.
We are committed to do a one-stop solution to your elevator parts procurement. Especially in Escalator Chain and Step Roller.
And we are the suppliers of Thyssen,Otis,Kone,Sch,Mitsubishi and so on.
I hope you can find some time to look at our website.
If you need any help, please feel free to contact us.
Here is elevator parts catelog,please check
https://www.oneelevator.com/categories/
Leopold Zhang
+86-18061464200
[email protected]
https://www.oneelevator.com/
From: ????????
Date: 2017-09-21 19:07
To: sales
Subject: Contact Form submission from One-stop Elevator supplier
This email was submitted from: https://www.oneelevator.com/contact/
Sender’s name: M??????
E-mail: [email protected]
Phone: 99363834555
Message: Dear Sirs,
My name is Maksat from Turkmenistan. Our company ” Arap Ulagy” activity more concentrated on elevators&escalator installation, repairing and maintenance of all brands in the world. At present time our elevators&escalator services are increased and we are facing really shortage of spare parts as written bellow:
1. Landing door contacts
2. Landing door rollers
3. Landing door shoes
4. Landing door MBS
5. Safety edge of cabin doors
6. Interceptor and MBS – MULTI BEAM SENSOR
7. Door motor belts
8. Up – Down limit switches
9. Over load board and switch
10. Cabin top – bottom shoe and pads
11. Hall button and electrical boards
12. Car station boards
13. Control panel boards
14. Motor brake pads
15. PAD – POSITION ARRIVAL DEVICE
16. Oil box for guide rail
17. Lubrication oil for guide rail
Please send your quotation for the above mentioned parts including transportation cargo to CIP Ashgabat, Turkmenistan for ele., brand “ Kleemann ”, “ LG Sigma ” , “ Mitsubishi ”, “ Otis ” separately as soon as possible able as to plan accordingly.
Thanks in Advance
???? Bekmyradow
Sales Manager